System Guide

SME VOIP SYSTEM GUIDE 4.7 93 | P a g e
Proprietary and Confidential
STEP 9:
On the same Dual-cell Settings page > Enter the relevant values for System chain ID respectively. The System chain ID
is a geographically unique DECT cell identity allocated to bridge several base stations together in a chain. An example
is 55555.
NOTE: Do NOT use a chain ID similar to an extension.
Screenshot
Click on Save button to keep modified changes of dual-cell settings into the base station.
Screenshot
NOTE: That after you save the entries, the System information changes status to “Unchained Allowed to Join as
Primary”
NOTE: The Dual-cell data synchronization ONLY works when the relevant Time Server is set in the system before
Server/Subscriber profile is added or created. Refer to STEP 4.
IMPORTANT: Base stations must be rebooted after the time server has been set.
STEP 10:
Logon to the base station that you want to connect to the Dual-cell system.
STEP 11:
Navigate to the Dual-cell page and “Enable” Dual-cell system and enter the Chain ID that you used on the first base
Station.