System Guide

SME VOIP SYSTEM GUIDE 4.7 90 | P a g e
Proprietary and Confidential
SIP Server (or PBX Server) Setup
STEP 5:
Create the relevant SIP server (or PBX Server) information in the system. Each service provider/customer should refer
to a SIP server vendor on how to setup SIP servers.
a. Click the link “Server” at the left-hand column of home page. This is the place where you can add
your SIP server for base station use.
b. Next, from the Server page, click on the Add Server URL and enter the relevant SIP server
information (an example is shown below).
c. Choose “Disabled” on NAT adaption parameter if NAT function of the SIP aware router is not
enabled. Enter the relevant parameters based on the description in the table below. Click Save.
Screenshot