System Guide

SME VOIP SYSTEM GUIDE 4.7 88 | P a g e
Proprietary and Confidential
Appendix – How-To setup a Dual-Cell System
This chapter we describe how to setup a dual-cell system, add and synchronize one or two base stations to the
network.
NOTE: It is possible to have RTX8660 and RTX8663 in the same chain.
Adding Base stations
Here are the recommended steps to add Base stations to network:
STEP 1:
Connect the Base station to a private network via standard Ethernet cable.
STEP 2:
Use one of the two methods to determine the base station IP address (see chapter 3.5 for more details).
Use the IP find menu in the handset (Menu * 4 7 *) to determine the IP address of the base station by matching the
MAC address on the back of the base station with the MAC address list on the handset. If not, use the second method
by typing the ipdect address I the browser, followed by the MAC address of the Base station.
STEP 3:
Open a browser on the computer and type in the IP address of the base. Press “Enter” to access the base Login to the
base station. The default input for Username/Password is: admin/admin.
Once you have been authenticated, the browser will display the front end of the SME Configuration Interface. The
front end will show relevant information of the base station.
Screenshot