System Guide

SME VOIP SYSTEM GUIDE 4.7 86 | P a g e
Proprietary and Confidential
5.19 Configuration
This page provides non-editable information showing the native format of entire SME VoIP Configuration parameter
settings. The settings format is exactly what is used in the configuration file. The configuration file is found in the TFTP
server.
The filename for the configuration server is <MAC_Address>.cfg. The configuration file is saved in the folder /Config in
the TFTP sever.
There are three ways to edit the configuration file or make changes to the settings page:
• Using the SME VoIP Configuration interface to make changes. Each page of the web interface is a template
for which the user can customize settings in the configuration file.
• Retrieving the relevant configuration file from the TFTP and modify and enter new changes. This should be
done with an expert network administrator.
• Navigate to the settings page of the VoIP SME Configuration interface > copy the contents of settings > save
them to any standard text editor e.g. notepad > modify the relevant contents, make sure you keep the
formatting intact > Save the file as <Enter_MAC_Address_of_RFP>.cfg > upload it into the relevant TFTP
server.
An example of contents of settings is as follows:
~RELEASE=BEATUS_FP_V0400_B0001
~System Mode=51/51
%GMT_TIME_ZONE%:0x06
%COUNTRY_VARIANT_ID%:0x12
%COUNTRY_REGION_ID%:0x00
%TIMEZONE_BY_COUNTRY_REGION%:0x01
%DST_BY_COUNTRY_REGION%:0x01
%DST_ENABLE%:0x02
%DST_FIXED_DAY_ENABLE%:0x00
%DST_START_MONTH%:0x03
%DST_START_DATE%:0x00
………
For detailed description on how to use provisioning please see Provisioning HOW-TO guide. Link is found in Appendix.