System Guide

SME VOIP SYSTEM GUIDE 4.7 75 | P a g e
Proprietary and Confidential
PARAMETERS
DESCRIPTION
BASE STATION
NAME
Base IP address and base station name from management settings
OPERATION
TIME/DURATION
Total operation time for the base since last reboot or reset
Duration is the time from data was cleared or system has been firmware upgraded.
COUNT
Counts number of calls on a base.
DROPPED
Dropped calls are the number of active calls that were dropped.
E.g. if a user has an active call and walks out of range, the call will be counted as a
dropped call. An entry is stored in the syslog when a call is dropped.
NO RESPONSE
No response calls are the number of calls that have no response, e.g. if an external user
tries to make a call to a handset that is out of range the call is counted as no response. An
entry is stored in the syslog when a call is no response.
DURATION
Call duration is total time that calls are active on the base.
ACTIVE
Active call shows how many active calls that are active on the base (Not active DECT calls,
but active calls). On one base there can be up to 30 active calls.
MAX ACTIVE
Maximum active calls are the maximum number of calls that has been active at the same
time.
CODECS
Logging and count of used codec types on each call.
HANDOVER
ATTEMPT SUCCESS
Counts the number of successful handovers.
HANDOVER
ATTEMPT FAILED
Counts the number of failed handovers.
AUDIO NOT
DETECTED
Counts the number of times where audio connection was not established.
5.16.4 Repeater data
Screenshot
The table is organized with headline row, data pr. base rows and with last row containing the sum of all base
parameters.