System Guide

SME VOIP SYSTEM GUIDE 4.7 68 | P a g e
Proprietary and Confidential
Good practice when adding repeaters to a Dual Cell system is to use manually registration, because then you can
control what base station the repeater(s) connects to.
5.14.1.2 Local Automatical
Repeater controlled by auto detects best base signal and auto assign RPN. The RPN and DECT sync source are greyed
out.
Screenshot
The repeater RPN is dynamic assigned in base RPN range.
With local automagical mode repeater on repeater (chain) is not supported.
5.14.2 Register Repeater
Adding a repeater makes it possible to register the repeater. Registration is made by selecting the repeater via the
checkbox and pressing “Register repeater”. The base window for repeater registration will be open until the
registration is stopped. By stopping the registration all registration on the system will be stopped including handset
registration.
5.14.3 Repeaters list
Screenshot