System Guide

SME VOIP SYSTEM GUIDE 4.7 61 | P a g e
Proprietary and Confidential
5.12.4 Base Station Group
The Base station group list various parameter settings for base stations including chain level information.
Screenshot:
PARAMETERS
DESCRIPTION
ID
Base unit identity in the chained network.
Permitted Output: Positive Integers
RPN
The Radio Fixed Part Number is an 8-bit DECT cell identity allocated by the installer. The
allocated RPN within the SME must be geographically unique.
Permitted Output: 0 to 255 (DEC) OR 0x00 to 0xFF (HEX)
VERSION
Base station current firmware version.
Permitted Output: positive Integers with dot (e.g. 273.1)
MAC ADDRESS
Contains the hardware Ethernet MAC address of the base station. It varies from Base
station to Base stations.
IP STATUS
Current Base station behavior in the SME network.
Possible Outputs
Connected: The relevant Base station(s) is online in the network
Connection Loss: Base station unexpectedly lost connection to network
This Unit: Current Base station whose http Web Interface is currently being accessed
DECT SYNC
SOURCE
With setting “Auto configure DECT sync source tree” set to Enable, this three will
automatically be generated. If manual configured the administrator should choose the
relevant “multi cell chain” level its wants a specific Base unit be placed. Maximum
number of “multi-cell chain” levels is 24.
Format of the selection: “AAAAAxx: RPNyy (-zz dBm)”
AAAAA: indication of sync. source for the base. Can be “Primary” or “Level xx”
xx: Sync. source base sync. level
yy: Sync. source base RPN
zz: RSSI level of sync. source base seen from the actual base
“(Any) RPN”: When a base is not synchronized to another base. State after reboot of
chain.
DECT PROPERTY
Base station characteristics in connection to the current multi cell network.
Possible Output(s)
Primary: Main Base station unto which all other nodes in the chain synchronizes to.
Locked: The Base unit is currently synchronized and locked to the master Base unit.
Searching: Base unit in the process of locating to a Master/slave as specified in Dect sync
source