System Guide

SME VOIP SYSTEM GUIDE 4.7 49 | P a g e
Proprietary and Confidential
Currently only Ipv4 address (32-bit) nomenclature is supported.
ALLOW BROADCAST
NTP
Checked
By checked time server is used.
REFRESH TIME (H)
24
The window time in hours within which time server refreshes.
Valid Inputs: positive integer
SET TIME ZONE BY
COUNTRY/REGION
Checked
By checked country setting is used (refer to country web page).
TIMEZONE
0
Refers to local time in GMT or UTC format.
Min: -12:00
Max: +13:00
SET DST BY
COUNTRY/REGION
Checked
By checked country setting is used (refer to country web page).
DAYLIGHT SAVING
TIME (DST)
Automatic
The system administrator can Enable or Disable DST manually.
Automatic: Enter the start and stop dates if you select Automatic.
DST FIXED BY DAY
Use Month and
Day of week
You determine when DST actually changes. Choose the relevant
date or day of the week, etc. from the drop-down menu.
DST START MONTH
March
Month that DST begins
Valid Input(s): Gregorian months (e.g. January, February, etc.)
DST START DATE
0
Numerical day of month DST comes to effect when DST is fixed to a
specific date
Valid Inputs: positive integer
DST START TIME
2
DST start time in the day
Valid Inputs: positive integer
DST START DAY OF
WEEK
Sunday
Day within the week DST begins
DST START DAY OF
WEEK, LAST IN
MONTH
Second First In
Month
Specify the week that DST will actually start.
DST STOP MONTH
October
The month that DST actually stops.
DST STOP DATE
0
The numerical day of month that DST turns off.
Valid Inputs: positive integer (1 to 12)
DST STOP TIME
2
The time of day DST stops
Valid Inputs: positive integer (1 to 12)
DST STOP DAY OF
WEEK
Sunday
The day of week DST stops
DST STOP DAY OF
WEEK LAST IN MONTH
Last in Month
The week within the month that DST will turn off.
NOTE: By checked time zone and DST the parameters in web page Time will be discarded.
5.10 Security
The security section is used for loading of certificates and for selecting if only trusted certificates are used.
Furthermore, web password can be configured.
The Security web is divided into three sections: Certificates (trusted), SIP Client Certificates (and keys) and Password
administration.
To setup secure fwu and configuration file download select HTTPs for the Management Transfer Protocol (refer to
chapter 5.6).
SIP and RTP security are dependent servers and in order to configure them , the user must use the web option Servers
(refer to chapter 5.4)