System Guide

SME VOIP SYSTEM GUIDE 4.7 44 | P a g e
Proprietary and Confidential
5.6.5 Syslog/SIP Log:
PARAMETER
DEFAULT VALUE
DESCRIPTION
UPLOAD OF SIP
LOG
Disabled
Enable this option to save low level SIP debug messages to the server. The
SIP logs are saved in the file format:
<MAC_Address><Time_Stamp>SIP.log
SYSLOG LEVEL
Normal
Operation
Off: No data is saved on syslog server
Normal Operation: Normal operation events are logged, incoming call,
outgoing calls, handset registration, DECT location, and call lost due to
busy, critical system errors, general system information.
System Analyze: Handset roaming, handset firmware updates status. The
system analyze level also contains the messages from normal operation.
Debug: Used by RTX for debug. Should not be enabled during normal
operation.
TLS SECURITY
Disabled
If enabled, it uses encrypted TCP, else - UDP
SYSLOG SERVER
IP ADDRESS
Empty
Permitted value(s): AAA.BBB.CCC.DDD or <URL>
SYSLOG SERVER
PORT
514
Port number of syslog server.
5.6.6 Location Gateway
PARAMETER
DEFAULT VALUE
DESCRIPTION
LOCATION
GATEWAYS:
Disabled
Enable to allow Location Gateways onto the system.
When enabled “Location Gateway” menu will be shown on main menu on
the left.
CONFIGURATION
SERVER:
Empty
Permitted value(s): AAA.BBB.CCC.DDD or <URL>
5.6.7 License:
PARAMETER
DEFAULT VALUE
DESCRIPTION
LICENSE
None
This feature allows administrators to register RTX8930 genetic headsets to
the system. License key must be obtained from authorized resellers and
only license matching the systems provider code will work.
There are three ways of configuring the system.
1. Manual configuration by use of the Web server in the base station(s)
2. By use of configuration files that are uploaded from a disk via the “Configuration” page on the Web server.
3. By use of configuration files which the base station(s) download(s) from a configuration server.
For detailed information See Appendix D.