System Guide

SME VOIP SYSTEM GUIDE 4.7 40 | P a g e
Proprietary and Confidential
o Bit 1..0 are ignored.
Setting all three of bit 4..2 will be ignored.
Permitted values: Positive integer, default is 0xB8
REJECT
ANONYMOUS
CALLS
Disabled
If disabled, all calls will be received.
If enabled, calls not registered will be automatically rejected
5.5.7 TCP Options
Screenshot
PARAMETER
DEFAULT VALUES
DESCRIPTION
TCP KEEP ALIVE
INTERVAL
120s
Specifies the interval the client waits before sending a keep-alive message
on a TCP connection.
5.5.8 Discovery
The following parameters of the “Discovery” section are explained
PARAMETER
DEFAULT VALUES
DESCRIPTION
LLDP-MED
SEND
Disabled
If “Enabled”, the BS will send 5 LLDP-MED messages when started.
LLDP-MED
SEND DELAY
30
Sends messages every 30 seconds to inform the network about its LLDP-
MED data
Note: This option works only if the first parameter is enabled (LLDP-MED
SEND)
VLAN VIA LLDP-
MED
Disabled
If “Enabled”, the BS will try to retrieve a VLAN ID from the received LLDP-
MED from a switch
Note: This feature is available only if the first parameter is enabled (LLDP-
MED SEND)