System Guide

SME VOIP SYSTEM GUIDE 4.7 25 | P a g e
Proprietary and Confidential
MAILBOX NAME
Empty
Name of centralized system used to store phone voice messages that
can be retrieved by recipient later. Valid Input(s): 8-bit string Latin
characters for the Name
MAILBOX
NUMBER
Empty
Dialed mail box number by long key press on key 1.
Valid Input(s): 0 – 9, *, #
Note: Mailbox Number parameter is available only when it’s enabled
from SIP server.
SERVER
Server 1 IP
FQDN or IP address of SIP server.
Drop down menu to select between the defined Servers of Service
provider.
CALL WAITING
FEATURE
Enabled
Used to enable/disable Call Waiting feature. When disabled a second
incoming call will be rejected. If enabled a second call will be
presented as call waiting.
BROADWORKS
FEATURE EVENT
PACKAGE
Disable
Enable/Disable Broadworks features
UACSTA
Disabled
Enable/Disable uaCSTA support
FORWARDING
UNCONDITIONAL
NUMBER
Empty
Number to which incoming calls must be re-routed to irrespective of
the current state of the handset. Forwarding Unconditional must be
enabled to function.
Note: Feature must be enabled in the SIP server before it can function
in the network
Note: Feature will be automatically disabled in case the handset or
extension is part of a group
FORWARDING NO
ANSWER
NUMBER
Empty
Number to which incoming calls must be re-routed to when there is no
response from the SIP end node.
Forwarding No Answer Number must be enabled to function.
Note: Feature must be enabled in the SIP server before it can function
in the network
Specify delay from call to forward in seconds.
Note: Feature will be automatically disabled in case the handset or
extension is part of a group
FORWARDING ON
BUSY NUMBER
Empty
Number to which incoming calls must be re-routed to when SIP node is
busy.
Forwarding On Busy Number must be enabled to function.
Note: Feature must be enabled in the SIP server before it can function
in the network
Note: Feature will be automatically disabled in case the handset or
extension is part of a group
REJECT
ANONYMOUS
CALLS
Disabled
Calls from anonymous numbers will automatically be rejected.
Enable to rejects anonymous calls
NOTE: Call forwarding can as well be configured from the handset by the user (for operation refer to the handset
guide).
When an extension is added (or edited) it can be selected (right side check box) which handsets shall subscribe to the
given extension, and hence be a part of this call group, see above figure. It is also possible to choose to add a new
handset entry at this point, and if this is done, DECT registration for the new entry can be enabled afterwards on the
handsets subpage.