System Guide

SME VOIP SYSTEM GUIDE 4.7 21 | P a g e

Proprietary and Confidential

COUNTRY

Specifying the country/territory where the SME network is located ensures that your phone

connection functions properly.

Note: The base language and country setting are independent of each other.

Time settings:

Here the user can configure the Time server. It should be used as time server in relevant

country for exact time. The time servers must deliver the time to conform to the Network

Time Protocol (NTP). Handsets are synchronised to this time. Base units synchronise to the

master using the Time server.

SECURITY

The users can administrate certificates and create account credentials with which they can

CENTRAL

DIRECTORY

Interface to common directory load of up to 3000 entries using *csv format or configuration

of LDAP directory.

Note: LDAP and central directory cannot operate at the same time.

DUAL CELL

Specify to connect up to two base stations to the network. Make sure the system ID for the

relevant base stations are the same otherwise the dual-cell feature will not work.

LAN SYNC

Allows base stations to connect over LAN PTP Sync, this makes it possible to have greater

distance between the base stations, compared to Air Sync.

REPEATERS

Administration and configuration of repeaters of the system

ALARM

Administration and configuration of the alarm settings on the system. This controls the

settings for alarms that can be sent to the handsets. This feature is only available on certain

types of handsets.

STATISTICS

Overview of system and call statistics for a system.

GENERAL

STATISTICS

Overview of general parameter statistics of the system

DIAGNOSTICS

Overview of Base stations and Extensions diagnostics

CONFIGURATION

This shows detail and complete SME network settings for base station(s),

HTTP/DNS/DHCP/TFTP server, SIP server, etc.

SYSLOG

Overall network related events or logs are displayed here (only live feed is shown).

SIP LOG

SIP related logs can be retrieved from URL link. It is also possible to clear logs from this

feature.

LOGOUT

Logout of the web interface.