System Guide

SME VOIP SYSTEM GUIDE 4.7 20 | P a g e
Proprietary and Confidential
The SME VoIP Configuration Interface is an in-built HTTP Web Server service residing in each base station. This
interface is a user-friendly interface and easy to handle even to a first-time user.
NOTE: Enabling secure web is not possible. For secure configuration use, secure provisioning.
This chapter seeks to define various variables/parameters available for configuration in the network.
5.1 Web navigation
We describe the left menu in the front end of the SME VoIP Administration Interface. For detailed overview of each
parameter from the menu bar, please see the next chapters.
Screenshot
FEATURE
DESCRIPTION
HOME/STATUS
This is the front end of the Base station’s HTTP web interface. This page shows the summary
of current operating condition and settings of the Base station and Handset(s).
EXTENSIONS
Administration of extensions and handsets in the system
SERVERS
On this page, the user can define which SIP/NAT server the network should connect to.
NETWORK
Network settings can be configured in this menu such as IP settings, NAT, SIP, VLAN,etc.
MANAGEMENT
Defines the Configuration server address, Management transfer protocol, sizes of
logs/traces that should be catalogued in the system.
FIRMWARE
UPDATE
Remote firmware updates (HTTP(s)/TFTP) settings of Base stations and handsets.
LOCATION
GATEWAY
If Location Gateway is connected, this parameter will be added to the menu bar, serving for
administration of Location Gateways