System Guide

SME VOIP SYSTEM GUIDE 4.7 15 | P a g e
Proprietary and Confidential
3.3 RTX Base Unit – Reset feature
It is possible to restart or reset the base station unit by pressing a knob at the bottom side of the unit (see image
below). Alternatively, it can be reset from the SME Configuration Interface. We do not recommend this; but
unplugging and plugging the Ethernet cable back to the PoE port of the base station also resets the base unit.
3.4 Installing the Base Station
First determine the best location that will provide an optimal coverage taking account the construction of the building,
architecture, and choice of building materials.
Next, mount the Base Station on a wall to cover range between 50 – 300 meters (i.e. 164 to 984 feet), depending
whether it’s an indoor or outdoor installation.
3.4.1 Mounting the Base Stations/Repeaters:
We recommend the base station to be mounted an angle other than vertical on both concrete/wood/plaster pillars
and walls for optimal radio coverage. Avoid mounting the base unit’s upside down as it significantly reduces radio
coverage.
As mentioned before, the screws and anchors are not included in the packaging. Therefore, you will have to provide
your own two pieces of screws M3.5 x 31mm. The distance between them is 70mm (please see the images below).
The height of wall mount is suggested to be less than or equal to 2 meters.