System Guide

SME VOIP SYSTEM GUIDE 4.7 13 | P a g e
Proprietary and Confidential
3 Installation of Base Stations/Repeater
After planning the network, next is to determine the proper places or location the relevant base stations will be
installed. Therefore, we briefly describe the how to install the base station in this chapter.
3.1 Package – Contents/Damage Inspection
Before Package Is Opened:
Examine the shipping package for evidence of physical damage or mishandling prior to opening. If there is a proof of
mishandling prior to opening, you must report it to the relevant support center of the regional representative or
operator.
Contents of Package:
Make sure all relevant components are available in the package before proceeding to the next step.
Every shipped base unit package/box contains the following items:
• Box for Base station (DC+PoE) unit + PSU
o 1 x Base Station unit
o 1 x Ethernet cable 1m
o 1 x Power supply single plug
o 1 x Quick guide
o 1 x Safety sheet
Depending on the manufacturer P/N, the DC adaptor type may vary as listed below:
Manufacturer P/N
DC adaptor plug type by
countries
S008ACM0500200
Multi-plug
S010WB0500200
UK
S010WV0500200
EU
S010WU0500200
US
S010WS0500200
AU
• Box for PoE only Base station unit
o 1 x Base Station unit
o 1 x Ethernet cable 1m
o 1 x Quick guide
o 1 x Safety sheet
• Spare accessories
o PSU single plug
o PSU multi plug
Please note that mounting screws and anchors are not added in the packaging.