System Guide

SME VOIP SYSTEM GUIDE 4.7 104 | P a g e
Proprietary and Confidential
Appendix – Multiline Feature
This section describes how to register the wireless handset to a system with active multiline feature.
One handset will be able to support up to 4 lines (4 different SIP accounts) ... A handset only supports 2 call
appearances.
The limitation of maximum 1000 terminals in the system is maintained, and the maximum number of SIP registrations,
one base station can handle, is maintained.
With 4 lines pr. terminal maximum number of terminals registered in a system are 250.
With 1-line pr. terminal maximum number of terminals registered in a system are 1000.
Still the limitation of 30 SIP accounts registered pr. base is maintained.
With 4 lines (SIP accounts) pr. terminal maximum number of terminals registered pr. base is 7.
The 4 SIP accounts pr. terminal follow the location of the terminal similar.
With multiline feature enabled 200 contacts in contact list is possible.
How to setup Multiline.
Step 1:
Register handset as described in chapter 7 (Appendix Adding Extensions).
Step 2:
Add a multiline to a handset by creating a new extension but instead for “New Handset” select the existing handset
that you want to add the multiline to. (in this case Handset Idx 1)
Step 3:
The extension will now show in the extension list with a new Idx , but the same IPEI, whereas on the handset list, the
Idx will be the same and the extension column will show the available extensions for the current handset.
NB: the handset must be rebooted for the changes to take effect.