User's Manual

SME VoIP System Guide, Version 2.6

Proprietary and Confidential

Chapter:

Multi

-cell Setup & Management

The Multi Cell data synchronization ONLY works when the relevant Time Server is set in

the system before Server/Subscriber profile is added or created. Refer to STEP 5.

IMPORTANT: Base stations must be rebooted after the time server has been set.

STEP 10 Repeat STEP 1-9 as explained above for each base stations.

IMPORTANT: It takes up to 5 minutes (synchronization time) to add a new base station to a Multi Cell

System.

6.2 Synchronizing the Base stations

STEP 11 On each SME VoIP Configuration interface for the base station(s) navigate to the

Home/Status page and Click the Reboot button.

This will trigger Are you sure you want to reboot base station? window. Click OK button on

this window. A successful restart of the base stations will lead to a display of the page:

Gateway has been reset.