User's Manual

SME VoIP System Guide, Version 2.6
Proprietary and Confidential
Chapter:
SME VoIP Administration Interface
72
5.15.3 Repeater data
The table is organised with headline row, data pr. base rows and with last row containing the sum of all
base parameters.
Parameters
Description
Idx/Name
Base IP address and base station name from management settings
Operation
D-H:M:S
Total operation time for the repeater since last reboot or reset
Duration is the time from data was cleared or system has been firmware
upgraded.
Busy
Busy Count is the number of times the repeater has been busy.
Busy Duration
D-H:M:S
Busy duration is the total time a repeater has been busy for speech (5 or more
calls active).
Max Active
Maximum active calls are the maximum number of calls that has been active at
the same time.
Searching
Repeater searching is the number of times a repeater has been searching for it’s
sync source
Recovery
In case the sync source is not present anymore the repeater will go into lock on
another base or repeater and show recovery mode
DECT Source
Changed
Number of time a repeater has changed sync source
Wide Band
Number of wideband calls on repeaters
Narrow Band
Number of narrow band calls on repeaters