User's Manual

SME VoIP System Guide, Version 2.6
Proprietary and Confidential
Chapter:
SME VoIP Administration Interface
71
source
Free Running
Base free running is the number of times a base has been free running
DECT Source
Changed
Number of time a base has changed sync source
5.15.2 Call data
The call data web is access by http://ip/CallStatistics.html and data are organised in a table as shown in
below example.
Screenshot
The table is organised with headline row, data pr. base rows and with last row containing the sum of all
base parameters.
Parameters
Description
Base Station
Name
Base IP address and base station name from management settings
Operation
time/Duration
Total operation time for the base since last reboot or reset
Duration is the time from data was cleared or system has been firmware
upgraded.
Count
Counts number of calls on a base.
Dropped
Dropped calls are the number of active calls that was dropped.
E.g. if a user has an active call and walks out of range, the calls will be counted as
a dropped call. An entry is stored in the syslog when a call is dropped.
No response
No response calls is the number of calls that have no response, e.g. if a external
user tries to make a call to a handset that is out of range the call is counted as no
response. An entry is stored in the syslog when a call is no response.
Duration
Call duration is total time that calls are active on the base.
Active
Active call shows how many active calls that are active on the base (Not active
DECT calls, but active calls). On one base there can be up to 30 active calls.
Max Active
Maximum active calls are the maximum number of calls that has been active at
the same time.
Codecs
Logging and count of used codec types on each call.
Handover
Success
Counts the number of successful handovers.
Handover Failed
Counts the number of failed handovers.