Manualshelf

User's Manual

ManualsBrandsRTX Hong Kong ManualsElectronicsDECT Base station
61626364656667686970
SME VoIP System Guide, Version 2.6
Proprietary and Confidential
Chapter:
SME VoIP Administration Interface
68
5.14 Alarm
In the Alarm Settings menu, it is controlled how an alarm appears on the handset. For example if the
handset detects “Man Down”, then it is defined in this menu what alarm signal this type of alarm will send
out and if a pre-alarm shall be signaled etc.
All configuration of the handset Alarm Settings is done from the base station. The concept is that on the
“Alarm” page on the web server, eight different alarm profiles can be configured. Afterwards for each
handset, it can be selected which of the configured alarm profiles, the given handset shall subscribe to.
When this is done the selected alarm profiles are sent to the handset.
See section 5.3.2.3 Multiline: Edit handset
The parameters that can be configured are:
Parameters
Description
Idx
Indicates the index number of a specific alarm.
Profile Alias
An alias or user-friendly name to help identify the different profiles when
selecting which profiles to enable for the individual handsets.
Alarm Type
The type of alarm is dependent of what kind of event that has triggered the alarm
on the handset. The handset supports either of the following categories:
Man Down
No Movement
Running
Pull Cord
Emergency Button
Disabled
Alarm Signal
The way the alarm is signalled as it received on the handset.
Message: A text message to an alarm server.
Call: An outgoing call to the specified emergency number.
Stop Alarm from
Handset
Enable/disable the possibility to stop/cancel the alarm from the handset.
Trigger Delay
The period from when the alarm has fired until the handset shows a pre-alarm
warning. If set to 0, there will be no pre-alarm warning, and the alarm will be
signalled immediately. The alarm algorithm typically needs about 6 sec. to detect
e.g. man down etc.
Stop Pre-Alarm
from Handset
Enable/disable the possibility to stop/cancel the pre-alarm from the handset.
Pre-Alarm Delay
The period from the pre-alarm warning is shown until the actual alarm is