User's Manual

SME VoIP System Guide, Version 2.6
Proprietary and Confidential
Chapter:
SME VoIP Administration Interface
53
5.10.2 SIP Client Certificates
To be able to establish a TLS connection in scenarios, where the server requests a client certificate, a
certificate/key pair must be loaded into the base. This is currently supported only for SIP.
To load a client certificate/key pair, both files must be selected at the same time, and it is done by pressing
“select files” under “Import SIP Client Certificate and Key Pair” and then select the certificate file as well as
the key file at the same time. Afterwards, press load.
The certificate must be provided as a DER encoded binary X.509 (.cer) file, and the key must be provided as
a binary PKCS#8 file.
Note: Use Chrome for loading SIP Client Certificates
Screenshot
5.10.3 Password
In the below the password parameters are defined.
Screenshot
Parameter
Default Values
Description
Username
Admin
Can be modified to any supported character and number
Maximum characters: 15
Current Password
Admin
Can be modified to any supported character and number
New Password
Empty
Change to new password
Maximum characters: 15
Confirm Password
Empty
Confirm password to reduce accidently wrong changes of
passwords
Password valid special signs: @/|<>-_:.!?*+#
Password valid numbers: 0-9
Password valid letters: a-z and A-Z