User's Manual

SME VoIP System Guide, Version 2.6

Proprietary and Confidential

Chapter:

SME VoIP Administration Interface

5.8 Time Server

In this section, we describe the different parameters available in the Time Server menu.

The Time server supplies the time used for data synchronisation in a multi-cell configuration. As such it is

mandatory for a multi-cell configuration. The system will not work without a time server configured.

As well the time server is used in the debug logs and for SIP traces information pages, and used to

determine when to check for new configuration and firmware files.

NOTE: It is not necessary to set the time server for standalone base stations (optional).

Press the “Time PC” button to grab the current PC time and use in the time server fields.

NOTE:

When time server parameters are modified/changed synchronisation between base stations can take up to

15 minutes before all base stations are synchronised, depending on the number of base stations in the

system. Changing time settings will require a reboot of system.

Screenshot