User's Manual

SME VoIP System Guide, Version 2.6
Proprietary and Confidential
Chapter:
SME VoIP Administration Interface
45
Management
upload script
files of the Configuration server. The configuration upload script is a
file located in e.g. TFTP server or Apache Server which is also the
configuration server.
Permitted value(s): /<configuration-file-directory>
Example: /CfgUpload
Note: Must begin with (/) slash character. Either / or \ can be used.
HTTP
Management
password
Empty
Password that should be entered in order to have access to the
configuration server.
HTTP client credentials are formed by “User name” and the “HTTP
Management password”.
Permitted value(s): 8-bit string length
Configuration
server
address
Empty
Server/device that provides configuration file to base station.
Type: DNS or IP address
Permitted value(s): AAA.BBB.CCC.DDD or <URL>
Base Specific
File
Empty
Base configuration file
Multi Cell
Specific File
Empty
The file name must be the chain id of the system.
E.g 00087b0a00b3.cfg
Permitted value(s): Format of file is chain ID.cfg
Configuration
File Download
Disabled
Base Specific file: Used when configuring a single cell base
Multicell Specific File: Used when configuring a multicell based
system
Base and Multicell Specific File: Used on out of factory bases to
specify VLAN and Multicell ID and settings.
DHCP
Controlled
Config Server
Disabled
Provisioning server options.
DHCP Option 66: Look for provision file by TFTP boot up server.
DHCP Custom Option: Look for provision file by custom option
DHCP Custom Option & Option 66: Look for provision file by first
custom option and then option 66.
DHCP Custom
Option
Empty
By default option 160, but custom option can be defined.
An option 160 URL defines the protocol and path information by
using a fully qualified domain name for clients that can use DNS.
DHCP Custom
Option Type
Empty
URL: URL of server with path.
Example of URL: http://myconfigs.com:5060/configs
Default configuration file on server must follow the name: MAC.cfg
IP Address: IP of server with path.
Text
Messaging
Disabled
Disable/enable messaging with Mobicall server
The third option is to “Enable Without Server”. With this setting
handset can send messages to other handsets, which support
messaging.
Note: Contact Mobicall to get the proper version and setup for
Mobicall server
Text
Messaging &
Alarm server
Empty
Permitted value(s): AAA.BBB.CCC.DDD or <URL>
Text
Messaging
Port
1300
Port number of message server.
Text
Messaging
Keep Alive
30
This defines the frequency of how keep-alive are sent
Permitted values: Positive integer, unit is in minutes