User's Manual

SME VoIP System Guide, Version 2.6

Proprietary and Confidential

Chapter:

SME VoIP Administration Interface

Actions

Description

Add extension

Access to the “Add extension” sub menu

Stop Registration

Manually stop DECT registration mode of the system. This prevents

any handset from registering to the system

Delete Handset(s)

Deregister selected handset(s), but do not delete the extension(s).

Enable registration mode for the system making it possible to

Deregister Handset(s)

Deregister the selected handset(s) and delete the extension(s).

Start SIP Registration(s)

Manually start SIP registration for selected handset(s).

SIP Delete Extension(s)

Deregister the selected handset(s) and delete the extension(s).

After creation of extensions check the handset Idx and click “Register Handset(s)” to DECT register the

handset to the base. First SIP registration is made by the system automatically by the handset DECT

registration procedure. For new extensions click “Start SIP Registration(s)” to SIP register the extensions to

the defined server.

Screenshot

Use the same procedure for other handsets, where the reference is the idx. no. when adding new

extensions to existing handsets.

5.3.3 Broadsoft Feature Event Package

If enabled the given SIP extension subscribes for the Broadsoft Application Server Feature Event Package,

and it becomes ready for reception of SIP NOTIFY with status on the following Broadsoft Server Services:

-Do Not Disturb

-Call Forwarding (Always, Busy, No answer)

The received status will be displayed in the handset idle display.

After pressing save the extension screen will appear with removed configuration option for the forward

feature as shown in the below picture.

Note: Call forwarding can as well be configured from the handset by the user (for operation refer to the

handset guide).