User's Manual

SME VoIP System Guide, Version 2.6
Proprietary and Confidential
Chapter:
SME VoIP Administration Interface
33
Parameter
Default Value(s)
Description
Location
ANY
Specify a handset to be located at a specific base station or ANY
base station. A location of a handset controls the DECT registration
and the SIP registrations. Binding a handset to a specific base will
bind the SIP registrations to this base.
IPEI
Handset IPEI
Shows the handset IPEI. For an already registered handset
changing the IPEI will deregister the handset at next handset
location update.
AC
Handset AC code
Shows the handset AC code. AC code is used at handset
registration. Changing the AC code for an already registered
handset will have no effect.
Alarm Line
No Alarm Line
Selected
The line of multilines to be used for alarm call feature
Alarm Number
Empty
Number to be dialled in case of handset alarm key is pressed (Long
keypress > 3 seconds on navigation center key )
Alarm Profiles
Not configured
Check the wanted alarm profiles for the particular handset.
Shared Call
Appearance
Settings
Not configured
Each of the eight rows in the table represents an SCA status LED
on the handset Idle screen. For each row it is possible to specify
which shared line an LED should display the state of.
 Only shared lines can be selected, that is, only extensions
defined for the handset for which BroadWorks Shared Call
Appearance is enabled are included in the selector.
 A shared line can be reused for several LEDs. Each LED
with the same shared line then corresponds to different
appearance-indexes for that line (1 LED = appearance-
index 1, 2 LEDs = appearance-indexes 1 and 2, and so on).
It is not necessary to select a shared line for all of the LEDs. If an
LED is not assigned a line, its position on the screen is simply
empty.
5.3.2.4 Multiline: Handset and extension list top/sub-menus
The handset extension list menu is used to control paring or deletion of handset to the system (DECT
registration/de-registrations) and to control SIP registration/de-registrations to the system.
Above and below the list are found commands for making operations on handsets/and extensions. The top
menu is general operations, and the sub menu is always operating on selected handsets/extensions.
Screenshots
In the below table each command is described.