User's Manual

Consumer Information
a) This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the back of this equipment is
a label that contains, among other information, a product identifier in the format US:
T7HTE00BX4088. If requested, this number
must be provided to the telephone company.
b) An applicable certification jacks Universal Service Order Codes (USOC) for the equipment is provided (i.e., RJ11C) in the packaging
with each piece of approved terminal equipment.
c) A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC
Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It
is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.
d) The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of
RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined
by the total RENs, contact the local telephone company. [For products approved after July 23, 2001, the REN for this
product is part of the product identifier that has the format US:
T7HTE00BX4088. The digits represented by ## are the
REN without a decimal point (e.g., 00 is a REN less than 0.05). For earlier products, the REN is separately shown on the
label.]
e) If this equipment RTX4088 causes harm to the telephone network, the telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as
soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
f) The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the
equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
g) Should you experience trouble with this equipment, please contact our service center, for repair or warranty information. If the
equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the
problem is resolved.
h) Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not alternate or repair any parts of
device except specified.
i) Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or
corporation commission for information.
j) NOTICE: If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this 1.9GHz
DECT Product for VoIP and PSTN does not disable your alarm equipment. If you have questions about what will disable alarm
equipment, consult your telephone company or a qualified installer.
k) This equipment is hearing aid compatible.
NOTICE: According to telephone company reports, AC electrical surges, typically resulting from lightning strikes, are very
destructive to telephone equipment connected to AC power sources. To minimize damage from these types of surges, a surge arrestor
is recommended.
Applicable for Coin or Pay Phone Only
To comply with state tariffs, the telephone company must be given notification prior to connection for customer-owned coin or credit
card phone. In some states, the state public utility commission, public service commission or corporation commission must give prior
approval of connection.