RTX3740 user manual Start up Insert the dongle to the computer USB port and follow the steps below for registration. Windows USB Driver After is plugged to the USB port, the dongle will show up as an unknown device, because the driver for it cannot be located automatically. Right-click the device and select “Update Driver Software…”.
RTX3740 user manual Click “Browse my computer for driver software”.
RTX3740 user manual Click “Let me pick form a list of device drivers on my computer.
RTX3740 user manual Make sure “Show All Devices” is selected and click “Next”.
RTX3740 user manual Click “Have Disk…”. Browse to “D:\GriffinSDK_v0211\FlexUsb\Driver” and click OK.
RTX3740 user manual Click “Next.” This warning is because the USB VID/PID of the CVM 493 board is not listed for the driver. Click Yes.
RTX3740 user manual Please perform initial configuration next.
RTX3740 user manual Initial Configuration Launch Jigsaw: D:\GriffinSDK_v0211\Jigsaw\Jigsaw.
RTX3740 user manual Select the “Device Basics” tab: In the LAS DB group, click Unlock and select “Device” in the drop-down list. The dongle reboots.
RTX3740 user manual Select the “Call Control” tab:
RTX3740 user manual Click the “< Lines” button: Click the + button 4 times.
RTX3740 user manual 4 lines are created: Click the “> Lines” button to hide line configuration.
RTX3740 user manual Select the “Mobility Management” tab: Enter a base name e.g. “DONGLE” and click the Set button. Cat-iq handsets will show this base name during registration.
RTX3740 user manual Click the registration enable button and perform registration from the handset.
RTX3740 user manual Additional information for RTX3740 Regulatory information United States This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
