User's Manual

7
2) Plug the Extension unit into a power outlet and switch the power on. The light
on top of the Extension unit will after a short period.
The Extension unit is now instal
led and your Wireless Phone Jack is now ready
for use.
INSTALLATION OF
EXTRA EXTENSION UNITS
1) Make sure the existing Wireless Phone Jack system (base and extension unit)
is powered on.
2) Unplug any cords attached to the Base unit (these will be connected again later).
3) Plug the extra Extension unit into a power outlet near the Base unit and switch
power on. This will activate a red light on the Extension unit.
4) Plug one end of the supplied phone line cord into the Base unit and the other
end into the extra Extension unit. A red light will be activated before changing
to yellow. This can take up to a minute.
5) Once the light changes on the Extension unit, unplug the phone line cord
between the Base unit and the Extension unit.
6) Replug the cords which you have unplugged.
Go to page 4 Extension unit installation to finish the installation process.
Computer
(dial-up modem, fax or satellite/
cable set top box)
Extension unit
3)2)