50 meter wireless phone line User Manual
DEAR CUSTOMER We would like to thank you for purchasing our Wireless Phone Jack and/or an additional Extension unit. We hope you will enjoy it. The Wireless Phone Jack is a wireless and cable free extension of the phone socket or VoIP adapter for an ordinary phone, modem, fax or satellite/cable set top box with integrated modem. Please read the following thoroughly and observe the operating instructions and information provided. Please visit our website for additional information: www.wireless-phonejack.
UNPAC KING Carefully remove units from the packaging. If there is any visible damage DO NOT attempt to operate the Wireless Phone Jack. Contact your dealer or shipping carrier immediately. BOX CONTENTS: Indicator light Phone socket Phone line 1) One Base unit Indicator light 2) One Extension unit Phone socket 3) One phone line cord 4) This user manual NOTE: Please read and follow carefully the instructions.
BA SE UNI T INSTALLATION 1) Connect the enclosed phone line cord to the Base unit and connect the other end to the phone wall socket.* 2) If you have a phone connected to the wall socket, unplug it and connect it to the Base unit instead (remove plug adapter before connecting to the Base unit). 3) Connect the Base unit to a power outlet and switch power on. The light on top of the Base unit should now glow green. The Base unit is now installed.
2) Plug the Extension unit into a power outlet and switch the power on. The light on top of the Extension unit will after a short period. The Extension unit is now installed and your Wireless Phone Jack is now ready for use. Computer (dial-up modem, fax or satellite/ cable set top box) 2) Extension unit 3) IN STALLATIO N OF EXTRA EX TENSION UNITS 1) Make sure the existing Wireless Phone Jack system (base and extension unit) is powered on.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. “Caution” Main plug is used as disconnect device and it should remain readily operable during intended use.
WPJ_11 Languages P/N: 60081231 24/12/09
Regulatory information This product meets the applicable Industry Canada technical specifications/Le present materiel est conforme aux specifications techniques applicables d’Industrie Canada. The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be connected to a telephone interface.
f) The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. g) Should you experience trouble with this equipment, please contact On2Locate; 567 Highway 51, Ridgeland, MS 39157, USA; Tel: 1-601-499-4478 for repair or warranty information.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver.