User's Manual

SME VoIP System Guide, Version 1.5
Proprietary and Confidential
Chapter: Multi-cell Setup & Management
93
c) RFP1: Press “Add server” and define SIP server IP and “Save” from the Servers page
d) RFP1: Multi cell system = enable and “Save” from the Multi-cell page
e) RFP1: Reboot (Verify the message:
“SYNCMGR: This base is ready to be master in a Chain”
From the debug logs)
13.7 Stage 3
Choose another base unit,RFP2 as Slave1
a) RFP2: Multi cell system = enable and “Save”
b) RFP2: Reboot (Verify from Debug log “SYNCMGR: This base is ready to join into another Chain”)
c) RFP1, RFP2: Wait 2min for stable Master-Slave chain (check for the message:
SYNCMGR: Socket#10 creation success
from the debug log)
d) After a successful restart, on each base [RFP1 and RFP2] Multi-cell page you will find the other base
connected and synchronized (the IP status shows This Unit or Connected) to the system as
illustrated below.
You can register an arbitrary HS to the extension and verify whether its successful from the “Home”
page and Handset UI