User's Manual

SME VoIP System Guide, Version 1.5
Proprietary and Confidential
Chapter: About This Document
8
1 About This Document
This document describes the configuration, customization, management, operation, maintenance and
trouble shooting of the SME VoIP System. It also describes effective practices that should be done to deploy
an optimal SME System.
1.1 Audience
Who should read this guide? First, this guide is intended for networking professionals responsible for
designing and implementing RTX based enterprise networks.
Second, network administrators and IT support personnel that need to install, configure, maintain and
monitor elements in a “live” SME VoIP network will find this document helpful. Furthermore, anyone who
wishes to gain knowledge on fundamental features in the UMBER system can also benefit from this
material.
1.2 When Should I Read This Guide
Read this guide before you install the core network devices of VoIP SME System and when you are ready to
setup or configure SIP server, NAT aware router, advanced VLAN settings, base stations, and multi cell
setup.
This manual will enable you to set up components in your network to communicate with each other and
also deploy a fully functionally VoIP SME System.
1.3 Important Assumptions
This document was written with the following assumptions in mind:
1) You have understanding of network deployment in general
2) You have working knowledge of basic TCP/IP/SIP protocols, Network Address Translation, etc..
3) A proper site survey has been performed, and the administrator have access to these plans
1.4 What’s Inside This Guide
We summarize the contents of this document in the table below:
Where Is
It?
Content
Purpose
Chapter 2
Introduction to the
SME VoIP Network
To gain knowledge about the different elements in a typical SME
VoIP Network
Chapter 3
Description of System
Deployment Scenarios
Provides the reader an idea of different possibilities available to
the user in deploying the system.
Chapter 4
SME VoIP Network
Planning/Optimization
To learn radio network planning techniques including
dimensioning, detailed capacity, coverage planning and network
optimisation
Chapter 5
Deployment
Mechanics – Multi-cell
Examine practical cases of how Multi-cell SME VoIP network can
be deployed