User's Manual

SME VoIP System Guide, Version 1.5
Proprietary and Confidential
Chapter: Registration Management - Handset
72
STEP 3 A SIP server must be configured on the base before handsets can be registered to the base.
To add a SIP server, select sheet “Server” and click the link “Add server”.
STEP 4 Fill out the displayed form and click “Save”. In the shown example we configure a SIP server
located on the IP address 192.168.50.77 and no Outbound proxy is used. Set “NAT adaption” if the
base is behind NAT . It is also possible to type in the URL’s direct link, i.e. like “sipphone.com”
NOTE:
The new server is displayed to the left when it is successfully saved.