User's Manual

SME VoIP System Guide, Version 1.5

Proprietary and Confidential

Chapter: Registration Management - Handset

11.2 Software required equipment

This section describes what software is needed. You will need the following to access the web configuration

interface on the base station:

Any standard browser e.g. Windows IE installed on the PC

11.3 Add server

This section describes how to add a SIP server to the base station (gateway).

STEP 1 Open browser on the computer and type in the IP address of the base. Press “Enter” to

access the base. If you don’t know the IP address, then write “ipdect<MAC address>. The MAC

address is written on the base/gateway.

If the MAC-address format does not work then use the network protocol analyser (e.g. wireshark)

to retrieve the IP address of Base station.

Enter the IP address to browser.

STEP 2 Enter the “Username” and “Password” when prompted. The default username and password

is “admin”.