User's Manual

SME VoIP System Guide, Version 1.5
Proprietary and Confidential
Chapter: Firmware Upgrade Management
64
Parameters
Description
Firmware Update Settings
Firmware update
server address
This is the IP address of server where the firmware is located. Currently, only 32-
bit is supported (i.e. IPv4 type – <aaa.bbb.ccc.ddd>)
Firmware path
The firmware is found at the \<Server>\<FwuPath>\BeatUs\ directory found in
the FTP or TFTP server.
Note: Either / or \ can be used
The <Server> is the root directory of the server created by the administrator and
should NOT be specified.
The <FwuPath> is a folder within the <Server> that contains the BeatUs
directory. This MUST be specified.
By default the …\BeatUs is hard-coded into the firmware. Therefore it should not
be specified in the firmware path.
Example of firmware path is \HQ_Office, \South_Office, or \FwuPath, etc. in that
manner.
Update Gateways/Handsets
Required Version
This is 8-bit value. The firmware filename is BeatUsSw_v00XX.fwu. The
administrator has to enter a numerical value XX or 00XX, where XX is a positive
integer.
STEP 10 Click on Firmware Update URL. On the Firmware Update Settings page enter the relevant
parameters as described in the table above.
Next, Click on Save button to keep the modified parameters into the base station.