User's Manual

SME VoIP System Guide, Version 1.5
Proprietary and Confidential
Chapter: SME VoIP Administration Interface
50
Screenshot
9.5 Management Settings Definitions
The administrator can configure base stations to perform some specific functions such as configuration of
file transfers, firmware up/downgrades, password management, and SIP/debug logs.
Parameter
Description
Title name of
the web site
This option is optional. It indicates the title that should appear at the top window
of the browser i.e. <Enter_title_here>-Browser_name
By default: “SME VoIP Configuration”
Configuration
server address
Server/device that provides configuration file to base station.
Type: DNS or IP address
Permitted value(s): AAA.BBB.CCC.DDD (Currently only IPv4 are supported) or
URL
(e.g.: firmware.rtx.net)
Management
Transfer
Protocol
The protocol assigned for configuration file and firmware downloads (or uploads)
Valid Input(s): HTTP, TFTP
Note: Choose TFTP if Bases/handsets firmware are updated over-air via TFTP
Server
HTTP
Management
upload script
The folder location or directory path that contains the configuration file of the
Configuration server. The configuration upload script is a file located in e.g. TFTP
server or Apache Server which is also the configuration server.
Permitted value(s): /<configuration-file-directory>
Example: /CfgUpload
Note: Must begin with (/) slash character. Either / or \ can be used.
HTTP
Management
password
Password that should be entered in order to have access to the configuration
server.
Permitted value(s): 8-bit string length
Upload of
Debug Log
Enable this to save low level system debug messages in the configuration server.
Further, the user can specify the kind of contents that should be saved.
Choose Boot Log option to save only boot related messages (i.e. logs during start
up of the system).
Choose Everything option if you want to save all debug logs including boot logs.
Valid Input: Disable, Boot Log, Everything
The Debug log will be saved in the file format <Time_Stamp>b.log in the TFTP
server as specified in the upload script. The upload script is a routine enabled at
the TFTP/HTTP server.
Upload of SIP
Log
Enable this option to save low level SIP debug messages in the configuration
server. Enable by choosing the option: Everything.
Valid Input: Disable, Everything