User's Manual

walls, niches and cupboards.
Map the base's coverage area
To find the best location for the repeater, you need to determine the base's
coverage area. Stand near the base and make a call. Walk away from the base
with the handset, and make a note where the signal becomes weaker. The
optimum location for the repeater is as far from the base as possible while still
maintaining a "good" signal, or just inside the location where the signal became
weaker.
Test the location
To test the location, plug the AC adapter into the repeater, then hold the repeater
in the place where you plan to mount it. The LED should remain on and steady,
indicating that the repeater has a good signal from the base.
If the LED flashes, the repeater is not getting a good signal. The repeater may be
too far away from the base, there may be interference from electronic devices, or
the signal might be blocked by thick walls or metal objects. Try moving the