User's Manual

•
Up to 6 repeaters per base station
•
Up to 3 repeaters in a sequential or daisy-chain layout
•
2 internal antennas to support 2 simultaneous calls
•
Repeater connection verification tone
•
Low power consumption
Specifications
AC power adapter:
Input: 100 -240VAC 50 -60Hz
Output; 5VDC 500mA
Unit weight: 5oz (142g)
Frequency band: 1920Mhz -1939Mhz
Transmit power: 110mW
Receiver sensitivity: <-92 dBm at 10-3 BER
Operating
Temperature
14° to 122° F (-10° to +50° C)
Standards:
Designed in accordance with the Digital Enhanced
Cordless Telecommunications (DECT) standard
Compliant with TBR6, TBR22 (Generic Access
Profile, GAP), and ETS 300 700 - ETSI Wireless
Relay Station Specification
2) Setting up your repeater
Before installing the repeater, you need to activate the repeater mode on your
base and then register the repeater to the base and any handsets. Before you
start the registration process, be sure you have
•
A working base
•
A working handset registered to that base
•
Any repeaters you want to register to this base (you must complete the
registration process separately for each repeater)
•
At least one of the AC adapters supplied with the repeaters.