User's Manual

Page 2 of 4
Select “RPN”
SINGLE CELL SYSTEM:
The base has always RPN00, first repeater will then be RPN01, second repeater RPN02 and third RPN03 (3 repeaters
maximum per base)
MULTI CELL SYSTEM:
Bases are increment by 2^2 in hex, means first base RPN00 second base RPN04 etc., in between RPN01, 02, 03
addressed for repeaters at Primary base and 05, 06, 07 addressed for Secondary base (3 repeaters maximum per base)
Select “DECT sync source”
What base or repeater the repeater has to be synchronize on.
Example of 2 bases in chain and 2 repeater chains.
3 repeaters chained at Primary base.
Repeater1 Repeater2 Repeater3
3 repeaters chained at Secondary base.
Repeater4 Repeater5 Repeater6
To edit repeater mode - select index.