User's Manual

Page 1 of 4
How to register repeater and firmware update over air.
Register repeater
1. Login to base.
2. Select page “Repeaters”
3. Select “Add Repeater”
4. Select “DECT Sync mode”
Manually: User controlled by manually assign “Repeater RPN” and DECT sync source RPN
Local Automatical: Repeater controlled by auto detects best base signal and auto assign RPN.
Chaining Automatical: Base controlled by auto detects best base or repeater signal and auto assign RPN.
Manually mode

Summary of content (4 pages)