User's Manual

Caution
l Risk of explosion if battery is replaced by an incorrect type. Use only the RTX battery model
60020436 (for Europe market) or 60020437 (for US market), 3.7V 650mAh Li-ion
rechargeable battery pack.
l Dispose of used batteries according to the instructions.
l You must install the handset batteries before using the cordless handset.
l Li-ion batteries must be disposed of in accordance with the applicable waste disposal
regulations.
l Do not dispose of the battery(ies) in fire. They may explode. Check with local codes for
possible special disposal instructions.
l Keep batteries out of the reach of children
7. On the handset, harshly slide and remove the handset back cover, install the rechargeable
battery pack into the battery compartment. Make sure battery following the polarity. Slide
back the handset back cover. LCD screen will light up as soon as battery is connected
through.
8. Put the handset into the base unit, according to picture shown below. Make sure LED charge
indicator on the base unit lights up to show charging is in progress. The charging icon
also appears on the screen of the handset. While charging, the bars in the icon scrolls and
when the handset is fully charged, all the bars of the battery will be filled.
Connector
PDF created with pdfFactory trial version www.pdffactory.com