User's Manual

Version 1.2 Page | 62
name and number, respectively. For the new F-key to be saved press the left softkey “Save”, and this
F-key is added to F-keys.
Edit F-Key
This feature enables that an existing F-key can be edited, if the name or number need changing.
Delete F-Key
By selecting “Delete F-Key” the message “Delete current contact from F-Key list?” appears on the
screen, and it is possible to press the left softkey “Yes” to delete the currently highlighted F-Key, or to
press the right softkey “No” to cancel and go back to the F-Keys menu.
Delete all F-Keys
With this function it is possible to delete all the saved F-Keys on the handset. When selecting “Delete
all F-Keys” the message “Delete entire F-Key list?” appears, and by pressing left softkey “Yes” this
action is performed, whereas pressing the right softkey “No” cancels the action and returns to the F-
Keys menu.
Speed dial
When selecting “Speed dial” the list with speed dial numbers assigned to long pressing the numbers 2-
9 appears.
From this menu it is possible to add the chosen F-Key to a speed dial number with the left softkey
“Add”. If an already existing speed dial entry is highlighted the left softkey gives the opportunity to
instead “Replace” the current speed dial entry with this one.
To delete a speed dial entry press the right softkey “Delete” and the entry is deleted straightaway.
NOTE: This speed dial list uses both contacts from the contact list, and from the F-Keys list. For
additional information on this feature see the section 7.1.4 Speed Dial/On Touch Dial.
6.9 Alarm List
The handset can receive and send emergency alarms. These different emergency settings are defined
and controlled from the web interface of the base station. But triggering an emergency alarm is done
from the handset. For further explanation about the emergency settings see the base station manual
via reference [3].
6.9.1 How to Trigger Alarms on the Handset
Five different alarm types can be triggered on the handset which is described in more detail in the
following.
Emergency Button Alarm
This alarm is triggered by long-pressing (3 seconds) the red button on top of the handset.
Pull Cord Alarm
The Pull Cord alarm can be triggered by pulling a cord containing a magnet from the pull cord hole on
the right side of the handset.