User's Manual

Version 1.2 Page | 48
6.5.14.1 Enable/disable
Bluetooth can either be enabled or disabled on the handset. The handset can only be paired with a
Bluetooth device when Bluetooth is enabled. With Bluetooth enabled an icon is displayed in the
status bar to indicate that Bluetooth is enabled on the handset.
In the status bar, the Bluetooth icon is shown if Bluetooth is enabled, but the handset is not paired
with any Bluetooth devices. This Bluetooth icon is displayed if the handset is paired with a
Bluetooth device.
6.5.14.2 Search for devices
To search for Bluetooth devices the Bluetooth function needs to be enabled before the handset can
find any devices. For the Bluetooth device to be found be the handset search it needs to be in pairing
mode. Until the handset has found any Bluetooth devices in pairing mode a searching screen as
displayed below is seen.
As it is seen above Bluetooth devices in pairing mode will be listed as they are detected by the
handset. At first the ID of the Bluetooth device will only be shown, but waiting a little while the name
of the device will appear on the handset screen. In this way it is easy to locate if it is the wanted device
that the handset is about to connect to.
Often, a PIN code is requested when a device is selected. By entering the requested PIN code of the
Bluetooth device a connection should be successfully established as displayed below.