User's Manual

Version 1.2 Page | 46
On for next call
If this function is enabled, then the caller ID will be hidden to the counterpart only for the next
outgoing call, and then for the following calls the number will not be hidden anymore.
Always on
With the “Always on” enabled, the caller ID will be hidden for the counterpart for all outgoing calls
initiated until this feature is disabled again.
NOTE: When hide number enabled, base sends SIP header “Privacy: id” to address
sip:[e-mail]
The PBX must support anonymous calls otherwise call rejected.
6.5.12 Call Forward
The “Call Forward” feature enables the user to forward all incoming calls in different cases described
below.
Forward Unconditionally
If this feature is enabled all incoming calls to the handset will be forwarded to the number setup in
“Forward To” as seen below.
In this case the handset will not receive any incoming calls, but all calls will automatically be forwarded
to the number setup in “Forward To”.
Forward No Answer
By enabling “Forward No Answer” incoming calls to the handset is forwarded if the call has not been