User's Manual

Version 1.2 Page | 41
6.5.6 Security
In the “Security” menu it is possible to set an automatic keylock, and change the PIN of the handset.
Automatic keylock
If the “Automatic keylock” feature is enabled, the keypad will lock automatically after a certain
amount of time that the handset has not been used. The currently applied setting is displayed when
highlighting the menu “Automatic keylock”.
A list of selectable timeouts is displayed when the user enters the “Automatic keylock” menu. Any one
of these can be selected by pressing the left softkey “Select” when the desired time interval is
highlighted. Afterwards, when the handset has been inactive in the selected time interval the keypad
will lock automatically.
NOTE: It is not possible to use the keys when these are locked. The user has to unlock the keys by long-
pressing . Only emergency numbers (e.g. 911 or 112) can be called without the user having to
unlock the keys.
Change PIN
In “Change PIN” the handset security PIN code can be changed – the PIN code is i.e. used when
settings are reset.
As seen above the current PIN code must be entered first to change it to a new PIN code.
6.5.7 Handset Name, Line, Reset Settings, Status
In the following settings, it is possible to change the handset name, select a line, reset settings, and see
the status data from the base station.