User's Manual

Version 1.2 Page | 21
A contact can only be assigned to one speed dial number at a time. The first defined number of the
contact will be dialed when the speed dial key is pressed. This means that if all numbers (work, mobile,
home, and other) are defined for the contact then the work number will be dialed. If the work number
is not defined then the mobile number is dialed etc.
NOTE: The ‘1’ key is reserved for voicemail. Long key press on ‘0’ is used for starting a normal dial
string with ‘+’.
6.1.4.1 How to setup speed dial
Prerequisite: There must be at least one contact in the contact list.
Steps:
1. Go to the contact list > Move to the contact that you want to assign a speed dial number to.
2. Select “More” > Select “Speed dial”
3. Move to the speed dial number (2 – 9) that you want to assign the contact number to.
4. Select “Add”. The contact name should be appended to the speed dial number.
5. Leave speed dial list by pressing the red “On-hook” key > Press “On-hook” key to exit “More”
menu > Exit contacts list by pressing “On-hook” key.
In the picture below it is showed how the local contact ‘Adam’ is added as a speed dial number to 2.
7.1.4.2 How to call a speed dial number
Prerequisite: The handset is in idle and the key lock is not active.
Steps:
1. Make a long key press (> 2 seconds) on a speed dial key that is assigned to a contact. The first
number defined is dialed.
Hereby, the local contact ‘Adam’ can be called directly from idle by long-pressing as displayed
below: