User's Manual

SME VoIP System Guide, Version 1.5
Proprietary and Confidential
Chapter: Multi-cell Setup & Management
94
13.8 Stage 4
Choose the 3
rd
base unit, RFP3 as Slave2
e) RFP3: Multi cell system = enable and “Save”
f) RFP3: Reboot (Verify Debug log “SYNCMGR: This base is ready to join into another Chain”)
g) RFP1, RFP3: Wait 2min for stable Master-Slave chain (SYNCMGR: Socket#10 creation success)
h) RFP3: Check mark ID2/RPN08 and select dropdown “1 – RPN: 04” and “Save”
i) RFP3: Reboot (Confirm from the Debug logthe message:
SYNCMGR: Socket#8 creation success
)
Multi-cell chain of 3 base stations has been created successfully. Next step involves adding extensions to
the system.