User's Manual

SME VoIP System Guide, Version 1.5

Proprietary and Confidential

Chapter: Multi-cell Setup & Management

A successful reboot will reset the time in the base station. Ensure the Time Server IP address is correct.

13.2.2 SIP Server (or PBX Server) Setup

STEP 7 Create the relevant SIP server (or PBX Server) information in the system. Each service

provider/customer should refer SIP server vendor on how to setup SIP servers.

Click the link “Server” at the left hand column of home page, you can add your SIP server for base

station use.

Next, from the Server page, click on the Add Server URL and enter the relevant SIP server

information (an example is shown below).

Choose “No” on NAT adaption parameter if NAT function of the SIP aware router is not enabled.

Enter the relevant parameters based on the description in the table below. Select Save button.