User's Manual

SME VoIP System Guide, Version 1.5
Proprietary and Confidential
Chapter: Multi-cell Setup & Management
84
STEP 3 Skip this step if you were successful with STEP 2. If the MAC-address method as described
above does not work, then use a standard network protocol analyzer (e.g. Wireshark) to eavesdrop
the IP address allocated to the base unit by the DHCP server. You can download Wireshark follow
its documentation to know how it is done.
Enter the IP address into the address bar of the browser to retrieve base station HTTP Web Server
Page.
STEP 4 On the Login page, enter your authenticating credentials (i.e. username and password is
default “admin”). Click OK button.
STEP 5 Once you have authenticated, the browser will display front end of the SME Configuration
Interface. The front end will show relevant information of the base station (in this case MAC-
Addr: 00087B00AA10 as highlighted in the snap-shot below).