User's Manual

SME VoIP System Guide, Version 1.5

Proprietary and Confidential

Chapter: VLAN Setup Management

12.5 Base station Setup

After the admin have setup the Backbone switch, next is to configure the Base stations via HTTP interface.

STEP 1 Connect the Base station to a private network via standard Ethernet cable (CAT-5).

STEP 2 Open any standard browser and enter the address:

http://ipdect<MAC-Address-Base-Station> or http://<IP-address of base station>

This will retrieve the HTTP Web Server page from the base station.

STEP 3 On the Login page, enter your authenticating credentials (the username and password is

admin by default unless it is changed). Click OK button.

STEP 4 Once you have authenticated, the browser will display front end of the SME Configuration

Interface. The front end will show relevant information of the base station.

STEP 5 Create the relevant SIP server information in the system. Each service provider/customer

should refer SIP server vendor on how to setup SIP servers.