User's Manual

SME VoIP System Guide, Version 1.5

Proprietary and Confidential

Chapter: Registration Management - Handset

11 Registration Management - Handset

In this chapter we briefly describe how to add server and register handsets in the SME VoIP Network.

11.1 Hardware required

This section describes what hardware is needed to execute the guideline. You need the following to

perform a registration of a handset to a base station (gateway):

1 x base station

1 x handset

1 x Ethernet cable (PoE)

1 x PC connected to the LAN, VLAN or WAN

Plug the Ethernet cable into the base station and connect the other end of the cable to your network (LAN,

VLAN or WAN ). The base station is powered via the Ethernet cable (PoE). PC must be connected to the

same network as the base station.

If your network doesn’t support PoE (Power over Ethernet), the a PoE adaptor must be used.